Are you tired of dealing with the pesky electric pole saw problems that keep you from efficiently completing your pruning and tree-cutting tasks? Well, you’re in luck!
In this article, we’ll be covering some of the most common issues that electric pole saw users encounter with their Poulan PLN1510 model (or any other electric pole saw, for that matter), and providing some simple yet effective solutions to help you get your saw back up and running smoothly in no time.
So if you’re ready to say goodbye to frustrating electric pole saw problems, keep reading!
Features / Specifications For the Poulan PLN1510:
| Feature | Specification |
|---|---|
| Electric start capability | – |
| 10-inch bar and chain | – |
| Automatic oiling system | – |
| 8-amp motor | – |
| Weight | 6.5 pounds |
| Power source | corded-electric |
| Chain pitch | 3/8 inch |
| Chain gauge | 0.05 inch |
| Oil tank capacity | 2.8 ounces |
| Noise rating | 103 dB |
What are some of the most common issues with the Poulan PLN1510 electric prune & pole saw?
checkout complete guide on common issues with the solution of Poulan PLN1510 electric pole saw.
Problem 1: Electric Pruner Won’t Start
The most common issue people encounter with electric pole saws is that they will turn off.
First, check that the cord is securely plugged into the outlet and the device itself. If everything seems secure, then try plugging it into another outlet. If that doesn’t work, check your circuit breaker or fuse box to ensure there hasn’t been an interruption in the electricity supply. If all else fails, contact customer service or a certified repair technician.
Problem 2: Chain Doesn’t Move
Another issue sometimes encountered with electric pole saws is that the blade won’t spin when you pull the trigger. This could be due to worn-out drive sprocket teeth or dull chain blades – both of which will require replacement parts from Poulan or a certified repair technician.
Additionally, if your chain has become too tight due to the over-tightening of screws and bolts, loosen these until they are snug enough – but not too loose! This should resolve any movement issues you may have been experiencing with your chain blade.
Problem 3: Excessive Vibration
Sometimes excessive vibration can occur while using an electric pole saw. This could be caused by either worn-out motor mounts or loose parts within the device (like screws).
To fix this problem, check that all screws and bolts are tightened securely – but not too tightly!
Additionally, replacing worn motor mounts may help reduce vibration levels significantly and improve your device’s overall performance. It’s best to contact customer service or a certified repair technician for assistance if needed.
Problem 4: Blade Not Engaging Properly
If you’re having trouble getting your blade to engage correctly with the motor, there are a few things you can check. First, ensure that all of the nuts and bolts on the blade assembly are securely tightened.
If that doesn’t trick, try lubricating any parts that move while using the saw, such as the chain or bar. Also, double-check that all your connections are secure and free from debris or damage.
Finally, if these steps don’t work, try replacing the blade itself – sometimes, an old blade needs to be replaced for everything to run smoothly again.
Problem 5: Saw Not Starting/Stalling Out
If your pole saw isn’t starting or stalling out during use, there could be a few potential causes. First, ensure your power cord is securely connected to both the power source and the pole saw itself; if either connection needs to be more secure, it won’t get enough power to start up.
Also, check to ensure that your extension cord (if applicable) is rated for outdoor use; indoor cords will not provide enough voltage for your pole saw to operate correctly.
Finally, inspect any other electrical components for wear and tear or damage; replace any part if necessary to keep your machine running safely and effectively.
Problem 6: Chain Slipping Off Bar
If your chain keeps slipping off its track on the bar while in use, it could mean one of two things: either you need to adjust the tension on your chain, or you need a new bar & chain assembly altogether.
You’ll want to consult your user manual to adjust tension correctly on a Poulan PLN1510 electric pole saw.
Each model may vary slightly, so follow instructions specific to yours as closely as possible! If adjusting tension doesn’t solve the problem, then replacing both parts might be necessary for optimal performance from your machine again.
How often should you clean and lubricate the saw to keep it running smoothly?
It’s essential to regularly clean and lubricates your electric pole saw to help keep it running smoothly and extend its lifespan. Here are some general guidelines for cleaning and lubricating your saw:
- Clean the saw after each use: After using the saw, wipe off any excess debris and dirt that has accumulated on the saw. This will help prevent rust and other damage.
- Lubricate the bar and chain after each use: Lubricate the bar and chain with bar and chain oil to help prevent wear and tear.
- Clean and lubricate the air filter regularly: The air filter should be cleaned and lubricated every 25 hours or at least once a month, whichever comes first.
- Clean and lubricate the spark plug: The spark plug should be cleaned and lubricated every 100 hours or at least once a year, whichever comes first.
FAQ (Frequently Asked Questions)
Q: How do I troubleshoot an electric pole saw that won’t start?Â
A: Check the power source, switch, and motor to ensure they function correctly.
Q: How do I fix an electric pole saw that cuts poorly?Â
A: Check the blade, bar and chain, and tension to ensure they are all in good condition and properly adjusted.
Q: How do I fix an electric pole saw that won’t stay running?
A: Check the fuel, spark plug, and ignition systems to ensure they are all functioning correctly.
Q: How do I fix an electric pole saw that vibrates excessively?Â
A: Check the blade, bar and chain, motor, and bearings to ensure they are all in good condition and properly aligned.
Q: What should I do if my electric pole saw won’t extend or retract?Â
A: If your electric pole saw won’t extend or retract, it could be a problem with the pole saw mechanism. Ensure all parts of the mechanism are functioning correctly and in good condition. If the problem persists, you may need to seek professional help to fix it.
Q: What should I do if my electric pole saw leaks oil or gas?Â
A: If your electric pole saw is leaking oil or gas, it could be a problem with the oil or gas seals. Check to ensure the seals are in good condition and replace them if necessary. If the problem persists, you may need to seek professional help to fix it.
Q: What should I do if my electric pole saw makes unusual noises?Â
A: If your electric pole saw is making unusual noises, it could be a problem with the blade, the bar, the chain, or the motor. Make sure all parts are in good condition and properly aligned. If the problem persists, you may need to seek professional help to fix it.
Conclusion
Electric pole saws, like the Poulan PLN1510 model, can be a handy tool for pruning trees and cutting branches. However, they can sometimes experience issues that can be frustrating to deal with. In this article, we covered some common problems and provided step-by-step solutions for troubleshooting and fixing them.
By following these tips and maintaining your electric pruner / pole saw according to the manufacturer’s instructions, you can keep your saw running smoothly and efficiently. If you’re unable to fix the problem yourself, don’t hesitate to seek professional help to ensure that your saw is in top condition.